“TUNER”, then press the key repeatedly to select “FM” or “AM”.
You can also use INPUT SELECTOR on the receiver.
2 Press ALT, then press D.TUNING on the remote.
3 Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when the tuning scale is set to 100 kHz.)
Move the easy scroll key to select
1
“TUNER” from the input list.
You can also use INPUT SELECTOR on the receiver.
2 Press > repeatedly until SUB menu appears, then select “FM/AM” from the SUB menu to select the FM or AM band.
You can also use FM/AM on the receiver.
3 Select “DIRECT TUNING” from the SUB menu.
4 Press > on the remote repeatedly until NUM menu appears, then select the numbers for the frequency.
Example 1: FM 102.50 MHz Select 1 b 0 b 2 b 5 b 0
(You do not have to enter the last “0” when the tuning scale is set to 100 kHz.) Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
(You do not have to enter the last “0” when the tuning scale is set to 10 kHz.)
If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.
RM-LG112
Press INPUT SELECTOR, then select
1
Direct tuning
Enter a frequency of the station directly by using NUM menu or numeric buttons on the remote. For details on the supplied remote, refer to the operating instructions supplied with the remote.
RM-LJ312

Example 2: AM 1,350 kHz

Select 1 b 3 b 5 b 0

(You do not have to enter the last “0” when the tuning scale is set to 10 kHz.)

If you have tuned in an AM station, adjust the direction of the AM loop antenna for optimum reception.

If you cannot tune in a station and the entered numbers flash

Make sure you have entered the right frequency. If not, repeat step 4 (RM-LJ312) or step 3 (RM- LG112). If the entered numbers still flash, the frequency is not used in your area.

26GB