Sony STR-DA5800ES 3 4, 1, 2, 1, 2

58
US
1Select “Listen” from the home
menu, then press .
2Select “FM/AM,” then press .
The FM/AM screen appears.
3Select the band switch.
4Press V/v to select “FM” or
“AM,” then press .
1Select the frequency indication
on the FM/AM screen.
2Press V/v.
V scans from lower to higher frequency
stations and v for scanning higher to
lower.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1Tune in the station you want to listen to
using Auto Tuning, Direct Tuning, or
select the preset station you want
(page 59).
2Press INFO/OPTIONS.
The options menu appears.
Note
You can set “FM Mode” in the options menu
when the frequency indication is selected, or
when called for in another situation.
3Select “FM Mode,” then press .
4Select “Monaural,” then press .
Enter the frequency of a station directly by
using the numeric buttons on the remote
control.
1Press SHIFT, then press
D.TUNING on the FM/AM
screen.
2Press the numeric buttons to
enter the frequency, then press
.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
Tips
•Adjust the direction of the AM loop antenna
(aerial) for optimum reception upon tuning to an
AM station.
Toggling between FM and AM
radio
Tuning to a station
automatically (Auto Tuning)
V/v/B/b,
HOME
INFO/
OPTIONS
D.TUNING
Numeric
buttons
SHIFT
?/1
RETURN/
EXIT O
Tuning into a station directly
(Direct Tuning)