Sony STR-DA5800ES 1, 2, 3, 4, Switching the zone setting of the remote control, 1, 2, 3, 4

80
US
When the Zone2 Out function is enabled and
you select the same HDMI input for both the
main zone and zone 2, there may be some
interference on the audio and video signals in
the main zone. To avoid possible interference,
you can place priority on the main zone for
HDMI input selection.
1Select “Settings” from the
home menu, then press .
2Select “HDMI Settings,” then
press .
3Select “Priority,” then press
.
4Select “Main Only,” then press
.
Switching the zone
setting of the remote
control
The remote control is basically designed for
use in the main zone. The zone setting of the
remote control is basically for use in zone2. If
you want to use it in zone3, switch the zone
setting of the remote control.
1Press ?/1 while pressing RM
SET UP.
The AMP and ZONE buttons flash.
2Press ZONE.
The AMP button goes off, the ZONE
button keeps flashing and the SHIFT
button lights up.
3Press the numeric button2 for
the zone 2, or 3 for the zone3
while the ZONE button is
flashing.
The ZONE button lights up.
4Press ENT/MEM.
The ZONE button flashes twice and the
remote control switches to zone2 or
zone3 mode.
Setting the priority for the main
zone and zone 2
ZONE
AMP
2, 3
ENT/
MEM
RM SET
UP
?/1
SHIFT