Multi Channel Surround Setup
For the best possible surround sound all speakers should be the same distance from the listening position (A). However, this unit lets you to place the center speaker up to 5 feet (1.5 meters) closer (B) and the rear speakers up to 15 feet (4.5 meters) closer (C) to the listening position. The front speakers can be placed from 3 to 40 feet (1.0 to 12.0 meters) from the listening position (A).
You can place the rear speakers either behind you or to the side, depending on the shape of your room (etc.).
When placing rear speakers to your side
B
A A
45°
C | C |
90°
20°
When placing rear speakers behind you
B
A A
45°
C | C |
90°
20°
Note
Do not place the center speaker farther away from the listening position than the front speakers.
Specifying the speaker parameters
1Press ?/1 to turn on the receiver.
2Press SET UP.
3 Press the cursor buttons ( or ) to select the parameter you want to adjust.
4Turn the jog dial to select the setting you desire. The setting is entered automatically.
5Repeat steps 3 and 4 until you have set all of the parameters that follow.
xFront speaker size (FRONT)
Initial setting : LARGE
• If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”.
• If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer.
• When the front speaker is set to “SMALL”, the center and rear speakers are also automatically set to “SMALL” (unless previously set to “NO”).
System Speaker the Up Setting and Up Hooking
19