Operations Amplifier Basic and Parts of Location
Front Panel Parts Description
ws NAME button
Press to activate the name function and enter names for preset stations and program sources (page 51).
wd EQUALIZER button
Press to turn the equalizer on or off. The EQ indicator in the display lights in the display when the equalizer is turned on.
When you adjust the equalizer using the EQ parameters (page 40), the settings are stored automatically and can be reproduced whenever you turn on the equalizer.
•The equalizer is not compatible with 96 kHz digital audio signals and during 5.1CH input.
wf The following buttons operate the
Models of area code CED
TUNING/PTY SELECT +/– buttons
Scans all the available radio stations.
Selects program types during PTY operations.
Models of other area codes
TUNING +/– buttons
Scans all the available radio stations.
wg
Models of area code CED
The following buttons operate the
RDS EON button
Press to set the receiver to automatically switch to stations broadcasting traffic announcements, news, or information program. The EON button does not function during AM reception.
RDS PTY button
Press to scan stations by program type. The PTY button does not function during AM reception.
Models of other area codes
TEST TONE button
Press to output the test tone.
SLEEP button
Press to activate the sleep timer.
wh The following buttons operate the
MEMORY button
Press to memorize a preset station.
FM MODE button
If “STEREO” flashes in the display and the FM stereo reception is poor, press this button. You will not have the stereo effect but the sound is improved.
wj SPEAKERS selector
Set according to the front speakers you want to drive.
Set to | To select |
AThe speakers connected to the FRONT SPEAKERS A terminals
BThe speakers connected to the FRONT SPEAKERS B terminals
A+B* | The speakers connected to both the FRONT |
| SPEAKERS A and B terminals (parallel |
| connection) |
|
|
OFF | No speaker output |
*Be sure to connect front speakers with a nominal impedance of 8 ohms or higher if you want to select both sets (A+B) of front
speakers. In this case, set the IMPEDANCE SELECTOR to “4Ω”
PHONES jack
Connects headphones.
•To use the headphones, set the SPEAKERS selector to OFF to output sound to the headphones.
•To enjoy surround sound from the headphones, we recommend selecting the HEADPHONE THEATER sound field. Selecting other sound fields when the SPEAKERS selector is set to OFF automatically presents a 2 channel (stereo) downmix from the headphones.
30