qa Use these buttons to enjoy surround sound. For details, see “Enjoying Surround Sound” starting from page 31.
A.F.D. button / indicator
Press to set the receiver to automatically detect the type of audio signal being input and perform proper decoding (if necessary). For details, see “AUTO FORMAT DECODING” on page 35.
2CH button / indicator
Press to output sound from only the front (left and right) speakers. For details, see “2 CHANNEL” on pate 35.
MODE +/– buttons / indicator
Press repeatedly to select the sound field you desire. For details, see “Selecting a Sound Field” on page 32.
•Sound fields are not compatible with 96 kHz digital audio signals.
qs ANLG DIRECT button
Press to listen to an analog source without digital processing by the equalizer, sound field, etc.
For details, see “ANALOG DIRECT” on page 35.
qd 5.1CH INPUT button
Press to enjoy the audio source connected to the 5.1CH INPUT jacks. Press 5.1 CH again to return to the original function.
•When 5.1CH INPUT is selected, the equalizer, bass boost, and sound field effects do not function.
qf DOOR OPEN button
Press to open the door on the front panel.
qg ENTER button
Press to enter individual characters for the preset station and program source names.
qh Cursor buttons ( / )
Press to select various speaker level, surround, and equalizer parameters (etc.).
qj Jog dial
Turn to adjust the selected speaker level, surround, and equalizer parameters (etc.).
qk LEVEL button
Press to activate the speaker level parameters (page 39). The indicator on the button lights up and you can adjust the various speaker level parameters (front balance, rear balance, etc.).
ql EQ button
Press to activate the equalizer parameters (page 40). The indicator on the button lights up and you can adjust the various equalizer parameters.
w; SUR button
Press to activate the surround parameters (page 38). The indicator on the button lights up and you can adjust the various surround parameters (effect level, wall type, etc.).
wa SET UP button
Press to activate the setup mode, then use the cursor buttons (qh) to select any of the following parameters. You can make various settings using the jog dial (qj).
When you select | You can |
Speaker setup | Specify the front, center, rear speaker |
| sizes, the rear speaker position, and |
| whether or not you are using a sub |
| woofer (page 19). |
|
|
Speaker Distance | Specify the front, center, and rear speaker |
| distances and the unit of measurement |
| (page 21). |
|
|
Crossover | Specify the front, center, and rear speaker |
frequency* | bass crossover frequency (page 22). |
|
|
Auto Function | Specify whether or not Sony components |
| connected via Control A1 cords will turn |
| on or off when selected using the |
| function buttons (page 53). |
|
|
2 way remote | Turn on or off response to remote |
signals sent from the 2 way remote (page | |
| 53). |
|
|
Color system | Select the TV color system of the monitor. |
| |
codes other than |
|
U, CA) |
|
|
|
OSD color | Specify the color of the |
display (page 54). | |
|
|
Dimmer Range | Specify the display to turn off when you |
| press the DIMMER button several times |
| (page 54). |
*Only when the speaker is set to“SMALL” in the speaker setup parameter.
Operations Amplifier Basic and Parts of Location
29