Other hookups

AC OUTLET*

AC OUTLET

AC power cordTo a wall outlet

*The configuration and shape of AC outlets vary according to the model and country to which the receiver is shipped.

Connecting the AC power cordConnect the AC power cord(s) of your audio/ video components to a wall outlet.

If you connect other audio/video components to the AC OUTLET on the receiver, the receiver will supply power to the connected component, allowing you to turn the whole system on or off when you turn the receiver on or off.

Caution

Make sure that the total power consumption of the component connected to the receiver’s AC OUTLET does not exceed the wattage stated on the rear panel. Do not connect high-wattage electrical home appliances such as electric irons, fans, or TVs to this outlet.

Note

If the AC power cord is disconnected for about one week, the receiver’s entire memory will be cleared.

Clearing the receiver’s

memory

Before using your receiver for the first time, or when you want to clear the receiver’s memory, do the following.

1 Turn off the receiver.2 Hold down ?/1 for 5 seconds.

“INITIAL” appears in the display and all of the following items are reset or cleared:

•All preset stations are reset or cleared.•All index names (of preset stations and program sources) are cleared.•The master volume is set to VOL MIN.

•All adjustments made (BALANCE, speaker system, etc.) are reset to factory settings.

Up Hooking Components the

11GB