Tuning range | 87.5 - 108.0 MHz |
Antenna terminals | 75 ohms, unbalanced |
Intermediate frequency | |
| 10.7 MHz |
Sensitivity |
|
Mono: | 18.3 dBf, 2.2 µV/75 ohms |
Stereo: | 38.3 dBf, 22.5 µV/75 ohms |
Usable sensitivity | 11.2 dBf, 1 µV/75 ohms |
S/N |
|
Mono: | 76 dB |
Stereo: | 70 dB |
Harmonic distortion at 1 kHz | |
Mono: | 0.5% |
Stereo: | 0.8% |
Separation | 35 dB at 1 kHz |
Frequency response | 30 Hz – 15 kHz, |
| |
Selectivity | 60 dB at 400 kHz |
AM tuner section |
|
Tuning range |
|
Models of area code U |
|
With | 530 – 1710 kHz4) |
With | 531 – 1710 kHz4) |
Models of area code CEL, CEK | |
With | 531 – 1602 kHz |
Antenna | Loop antenna |
Intermediate frequency | |
| 450 kHz |
Usable sensitivity | 50 dB/m (at 1,000 kHz or |
| 999 kHz) |
S/N | 45 dB (at 50 mV/m) |
Harmonic distortion | 1.0 % (50 mV/m, |
| 400 Hz) |
Selectivity |
|
At 9 kHz: | 35 dB |
At 10 kHz: | 40 dB |
4)You can change the AM tuning scale to 9 kHz or 10 kHz. After tuning in any AM station, turn off the receiver. Hold down PRESET TUNING + and press ?/1. All preset stations will be erased when you change the tuning scale. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure.
GeneralPower requirementsArea code | Power requirements |
U | 120 V AC, 60 Hz |
|
|
CEL, CEK | 230 V AC, 50/60 Hz |
| |
Power consumption | |
Area code | Power consumption |
|
|
U | 190 W |
|
|
CEL, CEK | 210 W |
|
|
0.5 W (for models of all area code)
AC outletsArea code | AC outlets |
|
|
|
|
U | 1 switched, | 120 W/1A MAX | |||
|
|
| |||
CEL, CEK | 1 switched, | 100 W MAX | |||
|
|
| |||
Dimensions | 430 ⋅ | 145 ⋅ 300 mm | |||
| 7 8 | ⋅ | 6 8 ⋅ | 6 | 8 |
| (16 / |
| 5 / | 11 / | in.) |
| including projecting parts | ||||
| and controls |
|
| ||
Mass (Approx.) | 7.0 kg (15 lb 7 oz) |
FM wire antenna (1)
AM loop antenna (1)
Remote commander
R6
For details on the area code of the component you are using, see page 4.
Design and specifications are subject to change without notice.
Information Additional