Receiver Operations
Recording
This receiver makes it easy to record to and from the components connected to the receiver. You don’t have to connect playback and recording components directly: once you select a program source on the receiver, you can record and edit as you normally would using the controls on each component.
Before you begin, make sure you’ve connected all components properly.
Function buttons
ç
Playback component (program source)
ç: Audio signal flow
ç
Recording component (Tape deck, MD recorder, VCR)
Recording on an audio tape, MiniDisc or video tape
You can record audio on a cassette tape, MiniDisc or video tape using the receiver. See the instruction manual of your tape deck, MD recorder or VCR if you need help.
1Press one of the function buttons to select the program source.
2Set the component to be ready for playing. For example, insert a CD into the CD player.
3Insert a blank tape or disc into the recording deck and adjust the recording level, if necessary.
4Start recording on the recording deck and then start playing the component.
11
