Error and warning codes
Error codes
When an error is detected during Auto Calibration, an error code will appear on the display cyclically after each measurement process as follows:
Error code t blank display t (error code t blank display)a) t PUSH t blank display
tENTER
a)Appears when there are more than one error code.
To rectify the error
1Record down the error code.
2Press the control button.
You can also use ENTER on the receiver.
3Press ?/1 to turn off the receiver.
4Rectify the error.
For details, see “Error code and remedies” below.
5Turn on the receiver and perform Auto Calibration again (page 25).
Error code and remedies
Error | Explanation | Remedies |
code |
|
|
|
|
|
ERROR 10 | The environment | Make sure the |
| is too noisy. | environment is |
|
| quiet during Auto |
|
| Calibration. |
|
| |
ERROR 11 The speakers are | Place your speakers | |
| placed too near | further away from |
| the optimizer | the optimizer |
| microphone. | microphone. |
|
|
|
ERROR 20 | Front speakers | Check the front |
| are not detected | speaker |
| or only one front | connection. |
| speaker is |
|
| detected. |
|
|
|
|
ERROR 21 | Only one | Check the surround |
| surround speaker | speaker |
| is detected. | connection. |
|
|
|
Warning codes
During Auto Calibration, the warning code provides information on the measurement result. The warning code will appear on the display cyclically as follows:
Warning code t blank display t (warning code t blank display)b) t PUSH t blank display t ENTER
b)Appears when there are more than one warning code.
You can choose to ignore the warning code as the Auto Calibration function will automatically adjust the settings. You can also change the settings manually.
To change the settings manually
1Record down the warning code.
2Press the control button.
You can also use ENTER on the receiver.
3Press ?/1 to turn off the receiver.
4Follow the solution provided in the “Warning code and solution” below.
5Turn on the receiver and perform Auto Calibration again (page 25).
Warning code and solution
Warning | Explanation | Solution |
code |
|
|
|
|
|
WARN. 40 | The environment | Make sure the |
| is noisy. | environment is |
|
| quiet during Auto |
|
| Calibration. |
|
| |
WARN. 60 | The front speakers Reposition your | |
| balance are out of | front speakers.c) |
| range. |
|
|
| |
WARN. 62 | The center speaker Reposition your | |
| level is out of | center speaker.d) |
| range. |
|
|
|
|
WARN. 63 | The surround left | Reposition your |
| speaker level is out | surround left |
| of range. | speaker.e) |
WARN. 64 | The surround right | Reposition your |
| speaker level is out | surround right |
| of range. | speaker.f) |
26GB