xDUAL (Digital broadcast language selection)

Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.

•DUAL M/S (Main/Sub)

Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously.

•DUAL M (Main)

Sound of the main language will be output.

•DUAL S (Sub)

Sound of the sub language will be output.

•DUAL M+S (Main + Sub)

Mixed sound of both the main and sub languages will be output.

xA.V. SYNC. (A/V Sync)

•A.V.SYNC. Y (Yes) (Delay time: 68 ms) The audio output is delayed so that the time gap between the audio output and visual display is minimized.

•A.V.SYNC. N (No) (Delay time: 0 ms) The audio output is not delayed.

Notes

•This parameter is useful when you use a large LCD or plasma monitor or a projector.

•This parameter is valid only when you use a sound field selected with the 2CH or A.F.D. buttons.

•This parameter is not valid when PCM 96 kHz or DTS 2048 signals are input.

xNAME IN (Naming inputs)

Lets you set the name of inputs. For details, see “Naming inputs” (page 54).

Settings for the system

(SYSTEM menu)

You can use the SYSTEM menu to set the size and distance of the speakers connected to this system.

Select “6-SYSTEM” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 32) and “Overview of the menus” (page 33).

SYSTEM menu parameters

xSW SPK (Sub woofer)

• YES

If you have connected a sub woofer, select “YES”.

• NO

If you have not connected a sub woofer, select “NO”. This activates the bass redirection circuitry and outputs the LFE signals from other speakers.

Tip

In order to take full advantage of the Dolby Digital bass redirection circuitry, we recommend setting the sub woofer’s cut off frequency as high as possible.

xFRT SPK (Front speakers)

• LARGE

If you connect large speakers that will effectively reproduce bass frequencies, select “LARGE”. Normally, select “LARGE”. When the sub woofer is set to “NO”, the front speakers are automatically set to “LARGE”.

• SMALL

If the sound is distorted, or you feel a lack of surround effects when using multi channel surround sound, select “SMALL” to activate the bass redirection circuitry and output the front channel bass frequencies from the sub woofer. When the front speakers are set to “SMALL”, the center, and surround speakers are also automatically set to “SMALL” (unless previously set to “NO”).

38GB