You can enter a name of up to 8 characters for inputs and display it on the receiver’s display. This is convenient for labeling the jacks with the names of the connected components.
1 Press the input button to select the input you want to create an index name for.
2 Press AMP MENU.
3 Press control button V/v repeatedly to select “5-AUDIO”.
You can also use U or u on the receiver.
4 Press the control button or control button b to enter the menu.
You can also use ENTER or i on the receiver.
5 Press control button V/v to select “NAME IN”.
You can also use U or u on the receiver.
6 Press the control button or control button b to enter the parameter.
You can also use ENTER or i on the receiver.
The cursor flashes and you can select a character. Follow the procedure given in “To create an index name” (page 51).
To return to the previous display
Press control button B.
You can also use I on the receiver.
You can check the sound field, etc., by changing the information on the display.
Be sure to use the buttons on the receiver for this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display changes cyclically as follows.
All inputs except the FM and AM band
Index name of the inputa) t Selected input
tSound field currently applied
FM and AM band
Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in
a)Index name appears only when you have assigned one to the input or preset station (page 51, 54). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.
b)During RDS reception only (models of area code CEL, CEK only) (page 52).
54GB