!£ The following buttons operate the
DIRECT TUNING button
Enables Direct Tuning (see page 35).
SHIFT button
Selects a memory page for preset stations.
Numeric buttons (1 to 0)
Inputs the numeric value.
!¢ The following buttons operate the
TUNING +/– buttons
Scans all the available radio stations.
PRESET TUNING +/– buttons
Scans all preset stations.
FM MODE button
If “STEREO” flashes in the display and the FM stereo reception is poor, press this button. You will not have the stereo effect but the sound is improved.
FM/AM button
Selects the FM or AM band.
MEMORY button
Press to memorize a preset station.
!∞ CURSOR MODE button
Press this button repeatedly to select any of the following three cursor modes. The indicator for the selected cursor mode lights up to the left of the display window. The indicator turns off when you press the SET UP button.
When cursor mode is | You can |
SURROUND | Change the various surround |
| parameter (effect level, wall type, |
| etc.), adjust the volume and |
| balance of the rear speakers, and |
| adjust the volume of the center |
| speaker and subwoofer (page 30) |
|
|
EQUALIZER | Adjust the equalization (bass/ |
| mid/treble) of the front, center |
| and rear speakers (page 31). |
| Press the EQ ON/OFF button to |
| activate the equalizer. |
|
|
INDEX | Enter an index name for preset |
| stations and program sources |
| (page 39) |
|
|
!§ Cursor buttons (///)
After pressing the CURSOR MODE or SET UP button, use these buttons to make specific settings (see pages 14, 16, 30, 31, 39, and 40).
!¶ SET UP button
Press this button repeatedly to select any of the following three indications. The selected indication appears in the display and you will be able to make various settings using the cursor buttons.
When you display | You can |
SPEAKER SETUP | Specify the front, center, rear |
| speaker sizes, the rear speaker |
| position, and whether or not you |
| are using a subwoofer (page 14) |
|
|
SPEAKER DISTANCE | Specify the front, center, and rear |
| speaker distances and the unit of |
| measurement (page 16) |
|
|
OTHER | Set the display to one of four |
| brightness levels (page 40) |
|
|
Operations Amplifier Basic and Parts of Location
23