Understanding the Multi-Channel Surround Displays
1 | 2 |
| 3 |
| 4 | 5 | 6 |
OPTICAL |
| aDIGITAL | L C | R | L.F.E. | S.WOOFER STEREO | MEMORY |
| PRO LOGIC | LS S | RS |
| D.RANGE MONO |
| |
9 | 8 |
|
|
|
| 7 |
|
Sound Surround Enjoying
1OPTICAL
Lights up when the source signal is a digital signal being input through the OPTICAL terminal.
2aDIGITAL
This indicator lights when the sound field is on and the unit is decoding signals recorded in the Dolby Digital
3Playback channel indicators
The letters light to indicate the channels being played
back. |
|
L: Front Left | R: Front Right |
C: Center (monaural) | LS: Left Surround |
RS: Right Surround |
|
S:Surround (monaural or the rear components obtained by Pro Logic processing)
The boxes around the letters light to indicate the speakers used to playback the channels.
See the next page for details regarding the playback channel indicators.
4L.F.E.
The letters “L.F.E.” light up when the disc being played contains the LFE (Low Frequency Effect) channel. When the sound of the LFE channel signal is actually being reproduced, the bars underneath the letters lights up to indicate the level. Since the LFE signal is not recorded in all parts of the input signal the bar indication will fluctuate (and may turn off) during playback.
5S.WOOFER
Lights when sub woofer selection is set to “YES” and this unit detects that the disc being played does not contain the LFE channel signal. While this indicator is lit, this unit creates a sub woofer signal based on the low frequency components of the front channels.
6Tuner indicators
These indicators light when using the receiver to tune in radio stations, etc. See pages 34~37 for tuner operations.
7D. RANGE
Lights when dynamic range compression is active. See page 31 and 32 to adjust the dynamic range compression.
8PRO LOGIC
Lights when this unit applies Pro Logic processing to two channel signals in order to output the center and surround channel signals.
9
Lights when Dolby Digital
28