Operations Other

Recording

Recording on a video tape

You can record from a VCR, a TV, or an LD player using the receiver. You can also add audio from a variety of audio sources when editing a video tape. See your VCR or LD player’s instruction manual if you need help.

1Select the program source to be recorded.

2Prepare the component for playing.

For example, insert the laser disc you want to record into the LD player.

3Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.

4Start recording on the recording VCR, then start playing the video tape or laser disc you want to record.

zYou can record the sound from any audio source onto a video tape while copying from a video tape or laser disc

Locate the point where you want to start recording from another audio source, select the program source, then start playback. The audio from that source will be recorded onto the audio track of the video tape instead of the audio from the original medium.

To resume audio recording from the original medium, select the video source again.

Note

You cannot record multi channel surround digital signals from a DVD, etc.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.

Press SLEEP while the power is on.

Each time you press SLEEP, the time changes as shown below.

n2:00:00 n1:30:00n1:00:00 n0:30:00 nOFF

The display dims after you have specified the time.

zYou can freely specify the time

Press SLEEP first, then specify the time you want using the cursor buttons (or ). The sleep time changes in 1 minute intervals. You can specify up to 5 hours.

zYou can check the time remaining before the receiver turns

off

Press SLEEP. The remaining time appears in the display.

Adjustments Using the SET UP Button

The SET UP button allows you to make following adjustments.

Adjusting the brightness of the display

1Press SET UP repeatedly until “OTHER” appears in the display.

2

Press the cursor buttons (

or

) to select

 

“DIMMER”.

 

 

3

Press the cursor buttons (

or

) to select the

 

brightness level.

 

 

You can select any of four brightness levels.

40