77GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Right
STR-DN1010
4-174-068-11(1)

S-AIR Operations
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.

To set the ID of the S-AIR main

unit
1Press GUI MODE.
After “MENU ON” appears on the display
for a while, “GUI” appears and the GUI
menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2Press V/v repeatedly to select
“Settings”, then press or b.
The Settings menu list appears on the TV
screen.
3Press V/v repeatedly to select “S-AIR”,
then press or b.
Note
When the S-AIR transmitter (not supplied) is not
inserted into the S-AIR main unit, “S-AIR”
cannot be selected.
4Press V/v repeatedly to select “S-AIR
ID”, then press or b.
The S-AIR ID menu appears.
5Press V/v repeatedly to select the ID
(A, B or C) you want, then press .
The ID of the S-AIR main unit is set. “Set
S-AIR ID of the sub unit to the same as that
of the main unit” appears.
6Press .
7Press GUI MODE.
The GUI menu turns off.
8Set the S-AIR sub unit to the same ID.
Sound transmission is established as
follows (example):
Tip
To confirm the current ID, performs steps 1 to 3
above. When you pair the S-AIR main unit with
the S-AIR sub unit (page 78), “(Pairing)”
appears beside the ID on the TV screen in the
GUI menu.
To exit the menu
Press MENU.

To set the ID of the S-AIR sub

unit
Be sure to match the ID on S-AIR sub unit you
want to the S-AIR main unit.
For details on setting the ID of the surround
amplifier and S-AIR receiver, refer to the
operating instructions supplied with the
surround amplifier and S-AIR receiver.

Establishing sound transmission

between the S-AIR main unit and

S-AIR sub unit (ID setting)

ID A
ID A
ID A
S-AIR main unit (this receiver)
S-AIR sub unit S-AIR sub unit
continued