96GB
D:\NORM'S JOB\SONY HA\SO0062\STR-DN1010\GB\GB05ENJ_STR-DN1010-CEL.fm masterpage: Left
STR-DN1010
4-174-068-11(1)

EQ Settings menu

You can use the following parameters to adjust
the tonal quality (bass/trebel level) of front
speakers.
Notes
• This function does not work in the following cases.
– Sound Field is set to “Analog Direct”.
– Signals with a sampling frequency of more than
48 kHz are being received.
• If the equalizer is adjusted while the receiver is
receiving signals with a sampling frequency of
more than 96 kHz, the signals will always be
played back at 96 kHz.

To adjust the equalizer on the

EQ screen

1Press B/b repeatedly to select “Bass”
or “Treble”.
2Press V/v repeatedly to adjust the gain,
then press .

Audio Settings menu

You can make settings for the audio to suit
your preference.
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust the delay from 0 ms to
300 ms in 10 ms steps.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This function does not work in the following cases.
– Sound Field is set to “Analog Direct”.
– Signals with a sampling frequency of more than
96 kHz are being received.
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
xMain/Sub
Sound of the main language will be output
through the front left speaker and sound of the
sub language will be output through the front
right speaker simultaneously.
xMain
Sound of the main language will be output.
xSub
Sound of the sub language will be output.
Level
(dB)
Bass Treble
Frequency
(Hz)

A/V Sync (Synchronizes audio

with video output)

Dual Mono (Digital broadcast

language selection)