Understanding the Multi-Channel Surround Displays

qs

 

qd

1

2

3 4

5

 

 

 

aDIGITAL PRO LOGIC DTS MPEG STEREO MONO MEMORY

SW SP. OFF OPT COAX

 

D.RANGE EQ

L

C

R

 

 

 

 

L F E

9 8

 

7

6

SL

S

SR

 

0qa

Surround Enjoying Sound

1; DIGITAL

This indicator lights up when the receiver is decoding signals recorded in the Dolby Digital format.

2PRO LOGIC

Lights up when the receiver applies Pro Logic processing to two channel signals in order to output the center and surround channel signals.*

*However, this indicator does not light if the center and surround speakers are set to “NO”, or the SPEAKERS button is set to OFF and the A.F.D. or NORMAL SURROUND sound fields are selected.

3DTS

Lights up when DTS signals are input.

Note

When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is NOT set to ANALOG (see 8 on page 23).

4MPEG

Lights up when MPEG** signals are input.

**Supports MPEG 2 channel only.

5Tuner indicators

These indicators light up when using the receiver to tune in radio stations, etc. See pages 36 – 39 for tuner operations.

6EQ

Lights when the equalizer functions.

7D. RANGE

Lights up when dynamic range compression is active. See page 34 to adjust the dynamic range compression.

8COAX

Lights up when the source signal is a digital signal being input through the COAX terminal.

9OPT

Lights up when the source signal is a digital signal being input through the OPT terminal.

0Play back channel indicators

The letters light up to indicate the channels being played back.

L: Front Left

R: Front Right

C: Center (monaural)

SL: Left Surround

SR: Right Surround

 

S:Surround (monaural or the surround components obtained by Pro Logic processing)

The boxes around the letters light up to indicate the speakers used to playback the channels.

See the next page for details regarding the playback channel indicators.

qa L F E

 

L F E

will light up when the disc being played

contains the LFE (Low Frequency Effect) channel and when the sound of the LFE channel signal is actually being reproduced.

qs SW

Lights up when sub woofer selection is set to “YES” (page 17) and the audio signal is output from the SUB WOOFER jack.

qd SP. OFF

Lights up when headphone is inserted or the SPEAKERS button is set to OFF.

30