Adjusting the speaker levels and balance
— TEST TONE
Use the remote while seated in your listening position to adjust the level of each speaker.
1 Press ?/1 to turn on the receiver.
2 Rotate VOLUME on the receiver clockwise.
3 Turn on the power of the sub woofer.
4 Press TEST TONE on the remote.
You will hear the test tone from each speaker in sequence.
Front (left) t Center t Front (right) t Surround (right) t Surround (left) t Sub woofer
5 Adjust the LEVEL parameters so that the level of the test tone from each speaker sounds the same when you are in your main listening position.
To adjust the balance and level of speakers, press MAIN MENU repeatedly to select LEVEL menu, press V/v to select the parameter you want to adjust (page 26). Then press B/b to select the setting.
6 Press TEST TONE on the remote again to turn off the test tone.
Tip
You can adjust the level of all speakers at the same time. Rotate VOLUME on the system or press VOLUME +/– on the remote.
Notes
•The front balance, center level, surround level, and sub woofer level are shown in the display during adjustment.
•To enjoy the better sound quality, do not turn the volume of the sub woofer too high.
After connecting all of your components to the receiver, do the following to verify that the connections were made correctly.
1 Press ?/1 to turn on the receiver.
2 Press INPUT SELECTOR to select a component (program source) that you connected (e.g., DVD player).
3 Turn on the component and start playing it.
4 Rotate VOLUME to turn up the volume.
If you do not obtain normal sound output after performing this procedure, see “Troubleshooting” on page 29 and take the appropriate measures to correct the problem.
components the up Hooking