Press TUNING + to change the frequency from low to high.
Press TUNING – to change the frequency from high to low.
Tip
If “STEREO” flashes in the display and the FM stereo reception is poor, press FM MODE to improve the sound. You will not be able to enjoy the stereo effect, but the sound will be less distorted.
Note
If “STEREO” does not appear at all when an FM broadcast is received normally, press FM MODE to turn on the “STEREO” indication.
Preset tuning
After you have tuned in stations using Automatic Tuning or Manual Tuning, you can preset them to the receiver. Then you can tune in any of the stations directly. Up to 30 FM or AM stations can be preset. The receiver will also scan all the stations that you have preset. Before tuning to preset stations, be sure to preset them by performing steps on “Presetting radio stations”.
Presetting radio stations
1 Press FM or AM repeatedly to select FM or AM band.
You can also use INPUT SELECTOR on the system. The last received station is tuned in.
2 Tune in the station that you want to preset using Automatic Tuning or Manual Tuning (page 12).
3 Press MEMORY.
“MEMORY” appears in the display for a few seconds.
Do steps 4 to 5 before “MEMORY” goes out.
4 Press SHIFT to select the memory page and press PRESET/CH + or PRESET/ CH – to select a preset number.
If “MEMORY” goes out before you press the preset number, start again from step 3.
5 Press MEMORY again to store the station.
If “MEMORY” goes out before you can store the station, start again from step 3.
6 Repeat steps 2 to 5 to preset another station.
Tuning to preset stations
1 Press FM or AM repeatedly to select FM or AM band.
You can also use INPUT SELECTOR on the system. The last received station is tuned in.
2 Press PRESET/CH + or PRESET/CH – repeatedly to select the preset station you want.
Each time you press the button, the receiver tunes in one preset station at a time, in the corresponding order and direction as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Tips
•In step 2, press SHIFT to select a memory page (A, B, or C).
•You can also use PRESET TUNING +/– on the receiver to tune to preset stations.
Operations Basic