or AM band.
You can also use INPUT SELECTOR on the system. The last received station is tuned in.
2 Press TUNING MODE repeatedly to select “AUTO T.”.
3 Press TUNING + or TUNING –.
Press TUNING + to scan from low to high; press TUNING – to scan from high to low. The receiver stops scanning whenever a station is received.
When the receiver reaches either end of the band
Scanning is repeated in the same direction.
To continue scanning, press TUNING + or TUNING – again.
Press FM or AM repeatedly to select FM

Basic Operations

Selecting the component

1 Press INPUT SELECTOR repeatedly to select the input.

The selected input appears in the display.

To select the

Display

DVD player

DVD

 

 

VCR

VIDEO

 

 

Hard disc or MD deck

HDD/MD

 

 

Satellite tuner

TV/SAT

 

 

Built-in tuner (FM)

Tuner (FM)

 

 

Built-in tuner (AM)

Tuner (AM)

 

 

2 Turn on the component and start playback.

3 Rotate VOLUME to adjust the volume.

To mute the sound

Press MUTING to mute the sound. MUTING appears on the display when the sound is muted. To cancel muting, press it again or turn up the volume.

12GB

Receiving broadcasts

Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7).

Use the remote for the tuner operation.

Automatic tuning

If you don’t know the frequency of the station you want, you can let the receiver scan all available stations in your area.

1

4

Manual tuning

You can tune in the station in 50 kHz steps for FM band and 9 kHz steps for AM band.

1 Press FM or AM repeatedly to select FM or AM band.

You can also use INPUT SELECTOR on the system. The last received station is tuned in.

2 Press TUNING MODE repeatedly to select “MANUAL T.”.

3 Press TUNING + or TUNING – repeatedly to tune in the station you want.