2 Tune in the station that you want to preset using Automatic Tuning (page 68) or Direct Tuning (page 68).

Switch the FM reception mode, if necessary (page 68).

3 Press SHIFT.4 Press ENT/MEM.

You can also use MEMORY/ENTER on the receiver.

“MEM” lights up for a few seconds. Perform steps 5 and 6 before “MEM” goes out.

5 Press the numeric buttons to select a preset number.

You can also press PRESET + or PRESET – to select a preset number.

If “MEM” goes out before you select the preset number, start again from step 3.

6 Press ENT/MEM.

You can also use MEMORY/ENTER on the receiver.

“MEM” lights off.

The station is stored as the selected preset number.

7 Repeat steps 1 to 6 to preset another station.
Tuning to preset stations

1 Press TUNER repeatedly to select the FM or AM band.

2 Press PRESET + or PRESET – repeatedly to select the preset station you want.

Each time you press the button, you can select a preset station as follows:

1 2 3 4 5 ...27

302928

You can also press SHIFT and then press the numeric buttons to select the preset station you want. Then, press ENT/MEM to enter the selection.

Using the controls on the receiver

1Turn INPUT SELECTOR to select the FM or AM band.

2Press TUNING MODE repeatedly to select “PRESET”.

3Press TUNING + or TUNING – to select the preset station you want.

70US