3 Secure the TV and the Floating Stand with four securing screws and with two clamp screws supplied with the Table Top stand, which you detached in procedure 1.
Rear side of the TV
Clamp screw
1Insert the glass shelf into the grooves in both pillars of the Floating Stand.
2Secure the glass shelf from beneath with the supplied securing screws (for glass shelf) as shown below.
Front of the
Securing screw
Note
When using an electric screwdriver, set the torque setting to about 1.5 N·m.
1
TV
Insert the glass shelf all the way in until it touches the stopper.
Caution label
Insert the securing screw so that the cross slot side faces down as shown above in the illustration.
2
Note
•Insert the glass shelf after installing the TV on the Floating Stand. If you fail to do so, you may hit the glass with the TV during installation and product damage or personal injury may result.
•Attach the glass shelf to the Floating Stand holding the glass shelf with the "caution" label at front right, as shown in the illustration.
8 (US)