Installation

For Sony Dealers

For the installation, have ready eight commercially available mounting screws, anchor bolts, etc. that are appropriate for the wall.

The type and length of the screws required depend on the material and strength of the wall. If you do not know which material your wall is made of, consult your Sony dealer or qualified service personnel.

Step 1: Check the parts

Check all the parts are included in the package.

Bracket A (1)

Bracket B (1)

Bracket C (1)

Screw (4)

 

 

 

(with a washer)

Step 2: Decide the installation location

Decide the location on the wall to install the TV.

Then, place bracket A on the installation location and mark the four screw holes on the wall using a pencil.

Before marking the location of the holes, make sure that the distance between the upper edge of bracket A and the ceiling is 20 cm (7 7/8 inches) or more, and that between the side edge of bracket A and the side wall is 25 cm (9 7/8 inches) or more.

Ceiling

 

Bracket A

20 cm (7 7/8

 

25 cm (9 7/8 inches)

inches) or

Mark this

or more

more

portion using

 

 

a pencil.

Wall

Note

Attach bracket A level with the floor.

4