Maytag HRE11250T manual Accessories And Tools Needed, Additional Tools Needed When Sweat Soldering

ACCESSORIES AND TOOLS NEEDED

Accessories

To simplify the installation Maytag has available the installation parts shown below. You may or may not need all of these accessories depending on your type of installation. Call Maytag Customer Service at 1-800-788-8899 for an authorized installer.

EXPANSION TANKS FOR THERMAL EXPANSION CONDITIONS AVAILABLE IN 2 GALLONS (7.6 LITERS), Part No. 66001013 AND 5 GALLONS (18.9 LITERS), Part No. 66001014 CAPACITY.

DRAIN PANS AVAILABLE IN 22” (559 mm) DIAMETER (PART NO. 66001011) FOR WATER HEATERS HAVING A DIAMETER 20” (508 mm) OR LESS, 24” (610mm) DIAMETER (PART NO. 66001105) FOR WATER HEATERS HAVING A DIAMETER 22” (559 mm) OR LESS AND 28” (711 mm) DIAMETER (PART NO. 66001012) FOR WATER HEATERS HAVING A DIAMETER 26” (660 mm) OR LESS.

Tools

You may or may not need all of these tools, depending on your type of installation. These tools can be purchased at your local Maytag store.

Additional Tools Needed When Sweat Soldering

Tubing Cutters or Hacksaw

Propane Torch

Pipe Wrench (2) 14" Screwdriver

6 Foot Tape or Folding Rule Garden Hose

Drill

Pipe Dope or Teflon Tape

ROLL OF TEFLON TAPE (USE ON

WATER CONNECTIONS)

DRILL

SLOT-HEAD SCREWDRIVER

PHILLIPS SCREWDRIVER

Soft Solder

Solder Flux

Emery Cloth

Wire Brushes

TUBING CUTTER

HACKSAW

ROLL OF	ROLL OF
EMERY CLOTH	LEAD-FREE	SOLDER
	SOFT SOLDER	FLUX

PIPE DOPE (SQUEEZE TUBE)

USE FOR WATER CONNECTIONS

GARDEN HOSE 6 FOOT TAPE PIPE WRENCH

	3/4” (19 mm) WIRE BRUSH
PROPANE
TORCH	1/2” (13 mm) WIRE BRUSH

6