2 | 3 | 4 5 6 |
| 7 | ||
| INPUT SELECTOR |
|
|
| VOLUME | |
| SACD |
|
|
|
| 5 |
| BALANCED LINE | CD |
|
| 4 | 6 |
|
|
|
| |||
| MD/TAPE 2 | LINE 1 |
| 3 |
| 7 |
|
| TAPE MONITOR TAPE 1 | TAPE 2 | DIRECT |
|
|
DAT/TAPE 1 | LINE 2 |
| 2 |
| 8 | |
|
|
|
| 1 |
| 9 |
|
|
|
|
| 0 | 10 |
1
4TAPE MONITOR button
Press to turn the tape monitor on and off. The indicator lights when the tape monitor is on and goes out when the tape monitor is turned off.
5TAPE MONITOR input select button
When the TAPE MONITOR (4) is on, press to select the input from the TAPE 1 or TAPE 2 input jacks. The indicator lights to show which input is selected.
6DIRECT button
Press to select the input connected to the DIRECT input jacks. The indicator lights, and the source component connected to the DIRECT input jacks takes priority over the source component selected with the INPUT SELECTOR control (3).
Press the DIRECT button again to return to the source selected with the INPUT SELECTOR control.
7VOLUME control
After turning on the component you selected, turn to adjust the volume.
Operations Basic and Parts of Location