Other

Operations

This chapter describes the operation necessary to record the output of the components connected to this unit on your DAT deck, MD deck, or tape deck (etc.).

Recording

Your preamplifier makes it easy to record to and from the components connected to it. You don’t have to connect the playback and recording components directly to each other: once you select a program source on the preamplifier, you can record and edit as you normally would using the controls on each component.

Before you begin, make sure you’ve connected all components properly.

Recording on an audio tape or MiniDisc

You can record on a cassette tape or MiniDisc using the preamplifier. See the instruction manual of your tape deck or MD deck if you need help.

1Turn INPUT SELECTOR to select the component to be recorded.

For example, select CD.

2Prepare the component for playing.

For example, insert a CD into the CD player.

3Insert a blank tape or MD into the recording deck and adjust the recording level, if necessary.

4Start recording on the recording deck, then start playback on the playback component.

zYou can check what is being recorded (tape monitor)

When using a 3-head tape deck, it is possible to check the signal that is actually being recorded. For example, if the tape deck connected to the DAT/TAPE 1 input jacks is being used to make a recording, press TAPE MONITOR to turn the tape monitor on (the indicator lights) and then TAPE 1/TAPE 2 until the indicator above TAPE 1 lights.

Notes

•You cannot record a digital audio signal using a component connected to the analog TAPE 1/DAT OUT jacks or TAPE 2/ MD OUT jacks. To record a digital audio signal, connect the digital output of the source component directly to the digital input of the recording deck.

•Sound adjustments do not affect the signal output from the TAPE1/DAT OUT or TAPE 2/MD OUT jacks.

Operations Other

13GB