Sony TC-SD1 Hooking up the system

Complete steps 1 through 3 (1 through 4 for CMT-SD3) to hook up your system using the supplied cords.

The front panel is made of tempered glass. Please remember to handle this unit carefully.

For the customers using the MDS-SD1 already

Hook up your system as follows. To hook up the MDS-SD1 with CMT-SD1/SD3, refer to the MDS-SD1 Operating Instructions.

CMT-SD1/SD3

Contents

Page To prevent fire or shock hazard, do not expose the unit to rain or moisture IMPORTANT: Never connect two mains leads into a single mains plug – For TC-SD1– This system is equipped with the Dolby* B-typeand C-typenoise reduction system Auto Power On/Off Table of Contents Hooking up the system How to insert the plugs If there is no sound or the tape does not record at the first operation Playing a tape To play a tape using the CMT-SD1/SD3component system Other operations Recording a CD — CD Synchro Recording To stop recording Recording manually Recording manually (continued) Timer recording radio programmes Timer recording radio programmes (continued) To cancel timer recording To change the setting To check the setting / To use the timer To cancel the timer Precautions About tempered glass On safety On placement Before placing a cassette in the tape deck Precautions (continued) To save a tape permanently Cleaning the tape heads Demagnetising the tape heads Cleaning the cabinet Troubleshooting Specifications General