Playing a tape

You can use any type of tape, TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal), since the tape deck automatically detects the tape type (ATS1)).

1)ATS: Automatic Tape Selection.

Tape deck

TAPE

2

TC-SD1

 

1/u indicator

DOLBY NR2) 3 ª 4 ￿￿ 0/)

The remote supplied with the CMT-SD1/SD3

TAPE(0/)

FUNCTION

VOL

1 Press 1/uon the CMT-SD1/SD3 to turn on the CMT-SD1/SD3 component system.

The tape deck turns on automatically.

2 Press §on the tape deck to open the cassette tray and insert a recorded tape.

Press §again to close the cassette tray.

With the side you want to play facing up

•

•

3 Set DIRECTION to Ato play one side, Åto play both sides once, and a3) to play both sides continuously.

4 Press ·.

Press ªto play the bottom side. The function switches to “TAPE” automatically, then the tape starts playing.

2)This tape deck is able to switch between Dolby B- type and C-type noise reduction systems.

3)The tape deck stops automatically after repeating the sequence five times.

To play a tape using the CMT-SD1/SD3 component system

Do the following operations in step 4;

1Press FUNCTION until “TAPE” appears in the display.

2Press TAPE(on the remote.

To play the bottom side, press TAPE( again on the remote.

6