1Firmly connect the system cable to the SYSTEM CONTROL jack on the CMT-SD1/SD3.

When using the MDS-SD1, connect to the SYSTEM CONTROL jack on the MDS-SD1.

SYSTEM

CONTROL

SYSTEM

CONTROL

Note

The system cable is used for exchanging signals between the tape deck and the CMT-SD1/SD3 (or MDS-SD1). If you do not connect the cord firmly, the tape deck may not operate correctly.

2Connect C to C, and D to D using the audio connecting cords. Insert the plugs into jacks of the same colour.

TC-SD1

ç￿

D

 

C

ç￿

 

 

CMT-SD1/SD3

 

: signal flow

CThe sound signals of the CD, MD and TUNER flow through the CMT-SD1/SD3 (and MDS-SD1) to the tape deck when you record onto a tape.

D The sound signal of the tape deck flows to the CMT-SD1/SD3 when you play a tape.

How to insert the plugs

Insert the plugs firmly into the jacks.

Not firmly inserted.

Insert to here.

3For CMT-SD3, reconnect the Mains lead of the super woofer to the unswitched AC OUTLET on the TC-SD1.

4Connect the Mains lead of the TC- SD1 to the AC OUTLET on the CMT-SD1/SD3.

When using the MDS-SD1, connect to the AC OUTLET on the MDS-SD1.

5Connect the Mains lead of the CMT-SD1/SD3 to a mains after you complete all the connections.

If there is no sound or the tape does not record at the first operation

Make sure the plugs are inserted into the jacks firmly.

•If the plugs are not inserted into the Cjacks firmly, you may not be able to record the sound of the CD, MD and TUNER onto a tape.

•If the plugs are not inserted into the D

jacks firmly, you may not be able to listen to the sound of the tape deck.

The plugs of the audio connecting cords may be tight. Insert the plugs at the point shown in “How to insert the plugs” in step 2.

5