Preparing a Power Source (continued)
Notes
•During recording, you will hear the beep through the earphone. During playback, you will hear the beep through the earphone and the speaker.
•During FF (CUE) or REW (REVIEW), the ilamp may flash with a beep. Only when the tape does not run properly, replace the batteries.
•In some cases when the unit is used with rechargeable batteries, only one BATT/REC lamp will light even though the batteries have been fully charged.
•After the batteries have been used for a while, the BATT/REC lamp(s) may flash with the playback sound when you turn up the volume; however, this does not mean that you need to replace the batteries.
•The unit will play back normally for a while even after
ilamp flashes with a beep. However, replace the batteries as soon as you can. If you do not, a loud noise may be emitted by the
•When the tape starts running or at the end of the tape the ilamp may momentarily light with a short beep. If the lamp goes off, you do not need to replace the batteries.