Sony TDM-BT1, TDMBT1 Using the unit, Preparation, Pairing, What is pairing

OPERATING THE UNIT

Using the unit

Preparation

1Connect the DIGITAL MEDIA PORT cable of this unit to the DIGITAL MEDIA PORT jack of a stereo audio output device (DAV series, etc.). Make sure the output device is turned off before connecting.

	To DIGITAL MEDIA
	PORT jack
	DMPORT
This unit	Stereo audio
	output device

2Turn on the stereo output device with a DIGITAL MEDIA PORT jack (DAV series, etc.) connected to this unit, and select the DIGITAL MEDIA PORT input.

The LED status indicator lights up for 2 seconds to indicate “Ready.”

Pairing

What is pairing?

BLUETOOTH devices need to be “paired” with each other beforehand. Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases:

•Pairing information is deleted after repair, etc.

•This unit can be paired with up to 8 BLUETOOTH stereo audio source devices. If a new device is paired thereafter, the device with the oldest registration among the 8 paired devices is replaced by the new one.

Continued 7

US