The list of detected devices appears on the display of the BLUETOOTH stereo audio source device.
This unit is displayed as “TDM-BT1.”
If “TDM-BT1” is not displayed, repeat from step 1.
Notes
The LED status indicator starts flashing very quickly and this unit enters pairing mode.
Note
Pairing mode is canceled automatically if pairing is not achieved within 5 minutes, or manually by pressing the OPR button. If pairing mode is canceled midway, start over from step 1.
1Press and hold the OPR button for 3 seconds or more.

OPR

O

 

PR

2Perform pairing procedure on the BLUETOOTH stereo audio source device to detect this unit.

•When pairing, be sure to place both the BLUETOOTH devices within 1 m (about 3 ft) of each other.

•Some devices cannot display the list of detected devices.

•To operate the BLUETOOTH stereo audio source device, refer to the operation instructions of the device.

3Select “TDM-BT1” on the display of the BLUETOOTH stereo audio source device.

4If Passcode* input is required on the BLUETOOTH stereo audio source device, input “0000”.

When BLUETOOTH pairing is complete, the LED status indicator flashes slowly and pairing information is memorized on this unit.

* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”

Notes

• Some BLUETOOTH stereo audio source devices may connect with the unit automatically when pairing is completed. For other devices, you will have to connect to this device manually.

•If you disconnect this unit or the BLUETOOTH stereo audio source device, before a connection is complete, pairing information is not memorized, and

8

pairing will not be completed.

US