When pairing with a BLUETOOTH stereo audio source device that cannot display a list of detected devices or that has no display

You may pair the device by setting both this unit and the BLUETOOTH stereo audio source device to pairing mode. For details, refer to the operating instructions supplied with the device.

Note

For devices without a display screen the device must have a default pin code of “0000” to work with the TDM-BT1.

If pairing is not complete

Start over from step 1.

Note

Passcode of this unit is fixed to “0000”. This unit cannot be paired with a BLUETOOTH stereo audio source device whose Passcode is not “0000”.

Tip

To pair with other BLUETOOTH stereo audio source devices, repeat steps 1 to 5 for each device.

Connecting

Check “Preparation” (page 7) and “Pairing” (page 7) before operating the unit.

1Check to see if the LED status indicator flashes slowly, indicating connection is possible.

Note

If the LED status indicator turns off, perform the pairing procedure, or press the OPR button momentarily.

2Start the BLUETOOTH connection from the BLUETOOTH stereo audio source device.

3Start music playback on the BLUETOOTH stereo audio source device.

Notes

•After connection is complete, the LED status indicator becomes constant.

•Turn off the bass boost function or equalizer function of the BLUETOOTH stereo audio source device. If these functions are on, sound may be distorted.

Continued 9

US