Indicator flashes quickly: Pairing in process
Indicator flashes (at
(Paring successful)
Indicator flashes (at about
Notes"'"
•"Pairing in process" of this unit is released after about 5 minutes. If pairing is not established within about 5 minutes, repeat the above procedure from step 4. iPod backlight may turn on in this 5 minutes.
•To enter "Pairing in process;' you need to turn off the power of this unit and turn on the power of iPod first.
When not completed pairing
Repeat the procedure from step 2.
To quit "Pairing in process"
Press and hold the power button of this unit for about 1 second to turn off this unit.
~Q·Tip
When paring this unit with a number of Bluetooth receiving devices, repeat steps 3 to 5 for each device individually.
Note
For using the Bluetooth function, it is required that the Bluetooth device on the other side is corresponding with the same profile as this unit. However, even if it is corresponding with the same profile, functions may differ depending on the specification of the Bluetooth device.
