Symptom
Distorted sound
Sound break, noise or playback speed change
Cause I Remedy
~Turn down the volume of the Bluetooth receiving device to the point where the sound is no longer distorted. For details on volume adjustment, refer to the operating instructions supplied with the Bluetooth receiving device.
~Turn off the EQ of iPod.
~Ensure that this unit is not receiving interference from a wireless LAN, other 2.4 GHz wireless device, or microwave oven.
~If a device that generates electromagnetic radiation, such as a wireless LAN, other Bluetooth device(s), or a microwave oven is nearby, move away from such sources.
~Remove any obstacle between this unit and other Bluetooth device or move away from the obstacle.
~Locate this unit and other Bluetooth device(s) as near as possible.
~
~Re- position or
Pairing cannot be established.
Bluetooth connection cannot be established with a device that has been «paired" before.
~Locate this unit and other Bluetooth device(s) as near as possible.
~Check if you input correct passcode (page 11).
~Locate this unit and other Bluetooth device(s) as near as possible.
~This unit tries to connect with either of the last two devices recognized before. If this unit cannot establish the Bluetooth connection with a paired device, operate the connecting procedures on the Bluetooth receiving device or pair the device again.
~Pairing information may be deleted. Pair the device again.
