Maintenance information and precautions

AC power adaptor

Unplug the unit from the wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

Do not operate the unit with a damaged cord or if the unit has been dropped or damaged.

Do not bend the power cord forcibly, or place a heavy object on it. This will damage the cord and may cause fire or electrical shock.

Prevent metallic objects from coming into contact with the metal parts of the connecting section. If this happens, a short may occur and the unit may be damaged.

Always keep metal contacts clean.

Do not disassemble the unit.

Do not apply mechanical shock or drop the unit.

While the unit is in use, particularly during charging, keep it away from AM receivers and video equipment. AM receivers and video equipment disturb AM reception and video operation.

The unit becomes warm during use. This is not a malfunction.

Do not place the unit in locations that are:

Extremely hot or cold

Dusty or dirty

Very humid

Vibrating

Notes on dry batteries

To avoid possible damage from battery leakage or corrosion, observe the following:

Be sure to insert the batteries with the + – polarities matched to the + – marks.

Dry batteries are not rechargeable.

Do not use a combination of new and old batteries.

Do not use different types of batteries.

Current flows from batteries when you are not using them for a long time.

Do not use leaking batteries.

If batteries are leaking

Wipe off the liquid in the battery compartment carefully before replacing the batteries.

If you touch the liquid, wash it off with water.

If the liquid get into your eyes, wash your eyes with a lot of water and then consult a doctor.

If any problem occurs, unplug your camcorder and contact your nearest Sony dealer.

74