OPERATIONS
Power and Volume
Adjust the volume balance between the powered subwoofer and the left and right speakers of the connected unit.
1Press the POWER button.
The indicator above the button lights up.
2Start playback on the connected unit.
3Adjust the volume of the powered subwoofer.
Moderate volume setting
To get natural bass sounds, adjust the volume of the powered subwoofer according to its position and the graphic equalizer setting of the connected unit.
Adjustment examples
aSet the VOLUME control to a little lower than the middle when the subwoofer is placed on the floor and the graphic equalizer is set to off.
bSet the VOLUME control to the middle when the subwoofer is positioned higher than the floor and the graphic equalizer is set to off.
Notes
•To avoid overloading the powered subwoofer, do not set the volume of the connected unit so high that the sound is distorted.
•Low frequency sounds may be distorted when they are emphasized by the graphic equalizer on the connected unit. Adjust the VOLUME control on the powered subwoofer or the graphic equalizer on the connected unit.
•If the powered subwoofer will not be used for a long period of time, press the POWER button to turn off the power, and unplug the AC cord from the wall outlet.
•If the output of sound should stop, press the POWER button to turn off the power, unplug the AC cord from the Wall outlet, and then in 5 minutes plug it again.
Auto Power
Before using this function, make sure the POWER button is set to ON.
The power is automatically turned on when receiving a signal input from INPUT jack.
The power is automatically turned off if no signal is input for
a while and the indicator of the POWER button becomes En dimmer. If input signal is too weak, this function does not effect.
5
