<[Copies]

The number of copies can be set in a range from “1” to “25.”

<[Scaling]

Specify the enlargement/reduction ratio. Any integer value ranging from “10%” to “400%” can be set for this ratio.

<[Border]

If this checkbox is checked (on), prints are printed with a white border around the edges. If this option is selected, the image size that can be printed is reduced.

<[Image Layout]

This item becomes valid if “UPC-10S01” is selected for the paper type.

•If [1 up] is selected, then only one image is printed on each sheet.

•If [16 up] is selected, then 16 identical thumbnail images are printed on each sheet.

<[Laminate Pattern]

Use this item to select one of the following three laminate processing options for the print surface:

•If [Glossy] is selected, prints are produced with a glossy finish.

•If [Texture] is selected, prints are produced with a textured finish.

•If [Matte] is selected, prints are produced with a matte finish.

<[About...]

Clicking this button displays the version information for the printer driver.

<[Restore Defaults]

Clicking this button restores all of the settings under the [Paper] tab to their initial values.

21