Requirements

Printing processing is performed faster when there is more memory and hard disk space available. Therefore, we recommend allocating as much memory and hard disk space as possible. The following environment is required in order to use the UP-DP10.

When using a Windows computer

<Requirements in order to connect to a USB port:

•A personal computer on which Microsoft Windows 98 runs normally

•At least 32MB of RAM

•At least 30MB of hard disk space

•A USB port*

*Connection requires a USB cable with a male type A connector and a male type B connector. (Refer to the illustration elsewhere on this page.)

<Requirements in order to connect to a printer port:

•A personal computer on which Microsoft Windows 98 or Windows 95 runs normally

•At least 32MB of RAM

•At least 30MB of hard disk space

•A printer port*

*Please see the user's manual provided with your computer for the appropriate type of printer cable.

Note

When using device driver (Windows\system\lpt.vxd) version 4.00.953 in Windows 95, normal printing might be impossible. In this event, obtain the most recent driver from your Windows 95 distributor.

When using a Macintosh

•A Power Macintosh computer running Mac OS 8.6 or later, and which is equipped with a USB port as a standard feature

•ColorSync2.5 or later

•At least 64MB of RAM

•At least 30MB of hard disk space *Connection requires a USB cable with a male

type A connector and a male type B connector. (Refer to the illustration below.)

Male type A

Male type B

connector

connector

5