Setup and Connection

When connecting to a printer port

Printer cable (purchased separately)

To printer port

Windows 95/98 computer

To parallel port

(Amphenol 36-pin connector)

Note

When using the printer in fast transfer mode (ECP mode), use an IEEE1284-compliant cable. Note that in order to use fast transfer mode, the parallel port must be set up on the personal computer side. For details, refer to the operating manual for the personal computer.

Connecting the Power Supply

Plug the female end of the power cord into the AC power inlet on the printer, and then plug the other end into an AC power outlet.

Plug

To outlet

Turning the Power On/Off

Press the Operation switch so that the POWER lamp is on. To turn the printer off, press the Operation switch again.

8