Sony UPX-C300 2 3,4, Changing the Passkey, Changing the passkey of the camera, Changing the passkey of the printer, To cancel changing the passkey setting

Press the MENU button.

Changing the passkey of the camera

4 Press B of the control button. The Bluetooth address appears.

To return to Ready, press the MENU button.

Changing the Passkey

The same passkey is set for all cameras and printers at the factory. If the passkey needs to be changed, set a new passkey, following the procedures below.

Once a new passkey is set, remove the printer registration, and register it again. Then authentication of the new passkey will be valid.

For details on removing a printer, see “Removing a Printer” on page 59, and on registering a printer, see “Adding/Registering a Printer” on page 57.

Press the MENU button.

Turn on the printer.

1

2

3 Press V of the control button to display “Bluetooth SETTING [>>].”

DIGITAL PHOTO PRINTER

ALARM

1

PRINT

MENU

EXEC

1

2 3,4

Confirming the Bluetooth Address of the Printer

1 Display the SETUP menu.

For details, see “Displaying the SETUP Menu” on page 28.

2 Press v or V of the control button to select Bluetooth.

3 Press the ENTER button.

The Bluetooth Menu display appears.

4 Press v or V of the control button to select

CHANGE PASSKEY.

5 Press the ENTER button.

The CHANGE PASSKEY display appears.

Bluetooth

CHANGE PASSKEY

CURRENT KEY : 1234

NEW KEY : 1 2 3 4

CANCEL

MOVE VALUE

6 Press b or B of the control button to select a digit you wish to change.

7 Press v or V of the control button to set the value. A value 0 to 9 can be used.

Repeat Steps 6 and 7 above to set a four-digit passkey.

8 Press B of the control button to select OK.

9 Press the ENTER button.

A new passkey has been set, and the display returns to Bluetooth Menu.

To cancel changing the passkey setting

In Step 8 above, select CANCEL instead of OK, then Press the ENTER button.

Changing the passkey of the printer

1 Turn on the printer.

“Ready BT RSSI [----]”appears on the operation display.

2

3 Press V of the control button to display “Bluetooth SETTING [>>].”

4 Press B of the control button. “Bluetooth ADDR” appears.

5 Press V of the control button to display “PASSKEY INPUT [>>].”

6 Press B of the control button.

“PASSKEY INPUT <1> [X:X:X:X]” appears. (<1>: Current digit to be set, [X:X:X:X]: Passkey)

54 Setting the Bluetooth Functions