Removing a Printer

1 Display the SETUP menu.

For details, see “Displaying the SETUP Menu” on page 28.

2 Press v or V of the control button to select Bluetooth.

3 Press the ENTER button.

The Bluetooth Menu display appears.

4 Press v or V of the control button to select

REMOVE PRINTER.The REMOVE PRINTER display appears.5 Press v or V of the control button to select a printer to be removed.6 Press b or B of the control button to selectREMOVE.

7 Press the ENTER button.

The printer selected in Step 5 is removed, and its printer name and Bluetooth address are deleted.

8 Press the ENTER button again.

The display returns to Bluetooth Menu.

To cancel removing the printer

In Step 6, select CANCEL instead of REMOVE, then Press the ENTER button. Deletion of the printer is canceled, and the display returns to Bluetooth Menu.

Operation with Several Printers

In a system using several printers, the basic operations are the same as when one printer is used. If the camera is turned on after a printer is turned on, the camera automatically searches for registered printers. The names and Bluetooth addresses of all printers with which connection has been established are displayed in black. Those of any printers with which connection has failed are displayed in gray.

Printers to be used can be selected with the PRINTER button. When a connected printer is selected, the print conditions of the selected printer are displayed in white on the LCD. If a printer that is not connected is selected, an alarm will be displayed in yellow.

To establish a connection with a currently disconnected printer, first check that the printer is turned on, and that the Bluetooth lamp is lit. In addition, press the PRINTER button on the camera, and make sure that the name of the printer to be connected is displayed in yellow. Then, press the PRINT button. “Reconnecting. . .” is displayed, and the process of reconnection starts. When reconnection has been established, in CAMERA mode, the camera returns to the normal recording mode. In PLAY or Auto Review mode, the Print Preview display is displayed.

To start printing, press the PRINT button again. Transmission of image data starts.

If printing is not required, press the MENU button to terminate the Print Preview display.

Note

When using the print queue function in a multi-printer system, images will only be printed from one printer.

Setting the Bluetooth Functions

59