Removing Jammed Paper

If a paper jam occurs while printing is in progress, the ALARM lamp lights, an error message appears, and printing stops.

Perform the following steps to remove the jammed paper.1 Press the 1 button on the printer to switch to standby mode.2 Remove the paper tray, and then remove any jammed paper.

3 Remove the paper jam cover on the rear panel, and check that there is no jammed paper. If there is any jammed paper, remove it.

 

 

 

 

 

 

 

 

 

 

 

 

Paper jam cover

Jammed paper

 

 

 

 

4 Reattach the paper jam cover.5 Insert the paper tray.6 Turn on the printer.

Note

If you are unable to remove the jammed paper, contact your nearest Sony dealer.
Cleaning the Inside of the Printer

If white lines or dots appear on printed pictures, clean the inside of the printer using the supplied cleaning cassette and the protective sheet included with the printing pack.

White lines

Notes

•Only perform cleaning if there are white lines or dots on the printed pictures.

•When the printer is printing pictures normally, cleaning will not improve print quality.

1 Remove the paper tray from the printer, and then remove the paper from the tray.

2 Place the protective sheet in the tray so that the unprinted side is facing up, make sure the arrows on the bottom of the tray and arrows on the printed side of the sheet are pointing in the same direction, and then insert the paper tray into the printer.

 

 

MENU

 

 

 

 

EXEC

 

 

DIGITAL

 

 

 

OPEN

PHOTO

PRINTER

PRINT

PUSH

 

 

 

 

ALARM

 

 

Troubleshooting 65