Setup
35
6 Change settings of Network MediaReceiver to match network connection
The factory default setting of the Network Media Receiver is ??? “Obtain an IP address
automatically (router present)” ???. Depending on your system environment, this setting may have
to be changed.
If a router is being used, there is no need to change the setting.
The setting is made using screens displayed on the connected TV.
See page 14 for the location of buttons on the remote control, and page 17 for remote control
operations.
1Press the TV POWER button on the remote control to turn the TV set
on.
2Use the TV/VIDEO button on the remote control to set the TV to
display the signal from the input to which the Network Media Receiver
is connected.
3Press the Network Media Receiver POWER button to turn the Network
Media Receiver on.
The standby indicator changes to green, and the ??? “Server List” ??? screen
appears on the TV.
4Press the OPTIONS button on the remote control.
The Options menu appears.