97
nN
Using Your VAIO Computer >
Using the TPM
To unlock the encrypted data with a recovery key stored on a USB flash memory device
To unlock the encrypted data with a recovery key stored on a USB fla sh memory device, your system needs to access the
USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup
screen:
!
You cannot use USB devices if you disable the USB ports in the BIOS setup screen. To enable the ports, follo w the steps in Disabling Built-in Devices
(page 133).
1Connect a USB flash memory device.
2Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.
The BIOS setup screen appears. If the screen does not appear, restart the computer and t ry again.
3Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.
4Press the M or m key to select Enable and then the Enter key.
5Press the < or , key to select Boot and then select Enabled for External Device Boot.
6Press the M or m key to select Boot Priority and then the Enter key.
7Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device.
!
You need to move Internal Optical Drive to the top of the list to recover the computer system usin g your Recovery Media.
8Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.
9After your system restarts, select Execute in the confirmation window and then press the Enter key.
10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption.
11 Save the recovery password to the USB flash memory device in the window for saving the recovery password.
12 Follow the on-screen instructions.
The encryption process will start.