qd Security lock

Connects to an optional security cable (Kensington’s).

The security lock corresponds to Kensington’s MicroSaver® Security System.

If you require further information, contact

Kensington

2855 Campus Drive San Mateo, CA 94403

In North America

Phone: 800-235-6708

Fax: 800-247-1317

Outside North America

Phone: 847-541-9500

Home page address:

http://www.kensington.com/

qf Ventillation holes (intake, bottom)qg Lamp cover (bottom)qh RELEASE (adjuster adjustment) button

For details, see “How to use the adjuster” on page 10.

qj Carrying handle

Pull up the handle from the projector for carrying.

qk Ventilation holes (intake, rear)
How to use the adjusterTo adjust the height

Adjust the height of the projector as follows:

1 Lift the projector and press the RELEASE button.

The adjuster will extend from the projector.

RELEASE button

2 While pressing the button, lower the projector. Then, release the button.

For fine adjustment, turn the adjusters to the right and the left.

to lower the to raise the

projector projector

Notes

•Do not remove the adjusters from the projector. Do not use the projector with the adjusters removed.

•Be careful not to let the projector down on your fingers.

•Do not push hard on the top of the projector with the adjusters out.

GB 10 Location and Function of Controls