The SET SETTING Menu

The SET SETTING menu is used for changing the settings of the projector.

SET SETTING

INPUT-A

STATUS: ON

INPUT-A: RGB

KEYSTONE MEMORY: ON

DIGITAL KEYSTONE: OFF

LANGUAGE: ENGLISH

INSTALLATION: FLR-FRONT

POWER SAVING: OFF

SIRCS RECEIVER: FRONT&REAR

LAMP TIMER: 00010h

Menu Items

STATUS (on-screen display)

Sets up the on-screen display.

ON: Shows all of the on-screen displays.

OFF: Turns off the on-screen displays except for the menus, a message when turning off the power, and warning messages.

INPUT-A

Selects the RGB or component signal input from the INPUT A connector.

Note

If the setting is not correct, “Please check INPUT-A setting.” appears on the screen and the color of the picture becomes strange or the picture is not displayed.

KEYSTONE MEMORY

Memorizes the data adjusted with DIGITAL KEYSTONE.

DIGITAL KEYSTONE

Adjusts trapezoidal distortion of the picture that may occur depending on the projection angle.

When the downside of the trapezoid islonger than the upside : Sets to a

minus value.

When the upside of the trapezoid is longerthan the downside : Sets to a plus value.LANGUAGE

Selects the language used in the menu and on-screen displays. Available languages are: English, French, German, Italian, Spanish, Japanese and Chinese.

INSTALLATION

Sets to reverse the picture horizontally or vertically.

FLR-FRONT:The picture is not reversed.

CEIL.-FRT:The picture is reversed horizontally and vertically.

FLOOR-REAR:The picture is reversed horizontally.

CEIL.-REAR:The picture is reversed vertically.

Note

In case of using a mirror, be careful of installation since the picture may be reversed.

POWER SAVING

When set to ON, the projector goes into power saving mode if no signal is input for 10 minutes.

SIRCS RECEIVER

Selects the remote control detectors (SIRCS receiver) on the front and rear of the projector.

FRONT & REAR: Activates both the front and rear detectors.

FRONT: Activates the front detector only.

REAR: Activates the rear detector only.

LAMP TIMER

Indicates the total number of hours for which the lamp currently used has been operated.

GB 30 The SET SETTING Menu