To connect an IBM PC/AT compatible computerWhen you use a USB mouse and USB equipment

Rear side

INPUT A

 

 

 

Computer

CONTROL S VIDEO IN

INPUT A

 

 

IN / PLUG IN

 

 

 

POWER

 

 

 

 

 

HD D-sub

 

 

 

15-pin cable

to monitor output

 

 

(supplied)

 

 

 

to USB equipment

Stereo audio connecting

to audio output

 

 

cable (not supplied)

 

 

 

USB cable A type – B type (supplied)

to USB connector

On the USB function

When connecting the projector to a computer by using the USB cable for the first time, the computer recognizes the following devices automatically.

1USB hub (general use)2USB human interface device (wireless mouse function)3USB human interface device (projector control function)

The computer also recognizes the device connected to the downstream connector on the projector.

Recommended operating environment

When you use the USB function, connect your computer as illustrated above. This application software and the USB function can be used on a computer loaded with Windows 98, Windows 98 SE, Windows 2000 or Windows ME preinstall models.

Notes

•As the projector recognizes the USB mouse when the computer is connected to the USB connector, do not connect anything to the PS/2 mouse port.

•Your computer may not start correctly when connected to the projector via the USB cable. In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable.

•This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer.

•Operations are not guaranteed for all the recommended computer environments.

Projecting and Up Setting

Connecting the Projector 17 GB