Sony VPL-CX2 Warning Messages, Caution Messages, Symptom, Message, Message, Cause and Remedy, Meaning and Remedy, Meaning and Remedy

Symptom	Cause and Remedy
The TEMP/FAN indicator	• The fan is broken.
flashes.	c Consult with qualified Sony personnel.
The TEMP/FAN indicator	• The internal temperature is unusually high.
lights up.	c Check to see if nothing is blocking the ventilation holes.
Both the LAMP/COVER	• The electrical system breaks down.
and TEMP/FAN indicators	c Consult with qualified Sony personnel.
light up.

Warning Messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning and Remedy
High temp.!	• Internal temperature is too high.
Lamp off in 1 min.	c Turn off the power.
	c Check to see if nothing is blocking the ventilation holes.
Frequency is out of range!	• This input signal cannot be projected as the frequency is out of the
	acceptable range of the projector.
	c Input a signal that is within the range of the frequency.
	• The resolution setting of the output signal of a computer is too
	high.	Maintenance
	c Set INPUT-A correctly (see page 27).
	c Set the setting of output to XGA (see page 14).
Please check INPUT-A	• You have input RGB signal from the computer when INPUT-A in
setting.	the SET SETTING menu is set to COMPONENT.
Please replace the LAMP.	• It is time to replace the lamp.
	c Replace the lamp.

Caution Messages

Use the list below to check the meaning of the messages displayed on the screen.

Message	Meaning and Remedy
NO INPUT	• No input signal
	c Check connections (see page 14).
Not applicable!	• You have pressed the wrong key.
	c Press the appropriate key.

Troubleshooting 33 GB